Skip to content
Home/Answers/Leak causes
CANADA SKYLIGHTS / Leak causes

Leak causes: Reseal vs Replace

Leak causes: Compare one-time cost, recurrence risk and ten-year total.

Updated 2026-11-20About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Leak causes: Compare one-time cost, recurrence risk and ten-year total. leak depends on flashing/seal/gap.

Why it matters

Three leak sources: flashing (most common), the glass-to-frame seal, and the curb-to-roof junction. Check in that order instead of caulking blindly.

Flashing.

Step by step

  1. Locate the leak from inside first.
  2. Check flashing and the curb junction.
  3. Separate condensation from a leak.
  4. Replace only when the frame is rotten.

Common mistakes

  • Caulking without checking flashing.
  • Treating condensation as a leak.
  • New glass without new flashing.
  • Roof work in winter.

Checklist

  • Leak point, glass, frame, flashing, roof.
  • Two quotes.
  • Warranty terms.
  • Dry window.

Who it is for

If you are deciding between two models, put Flashing. and Seal. in one table and compare on the same basis.

Key facts

  • Flashing.
  • Seal.
  • Gap.

FAQ

Leak causes: Reseal vs Replace

Leak causes: Compare one-time cost, recurrence risk and ten-year total. leak depends on flashing/seal/gap.

What should I check before buying a Leak causes?

leak depends on flashing/seal/gap. Key checks: Flashing.; Seal..

Is a Leak causes worth it?

Depends on use, budget and upkeep; a Leak causes is not automatically better because it costs more.

Source: NRCA / Canada Mortgage and Housing

Top picks

ProductBest forPrice
Skylight Flashing KitFlashingMidCompare options
Roofing ContractorContractorHighCompare options
Skylight UnitUnitHighCompare options

Sources